SW5580, SW5580 Metrix, Công tắc rung thông minh SW5580, Đại lý Metrix tại Việt Nam

Đại lý Metrix tại Việt Nam

The SW5580 is a new generation DIN rail mounted Smart Vibration Signal Conditioner and Switch from Metrix. It has been designed to accept signals from machine casing mounted velocity sensors, accelerometers or shaft observing proximity probe systems and produce a 4-20 mA output proportional to the measured variable. It provides the user with a configurable signal input type for two independent channels plus a configurable feature to scale output either to peak or RMS units. It comes with two relays per channel. The relays can be ordered as either solid state or mechanical dry contact options.



  • Two channel module, one or two channels enabled
  • Field configurable full-scale range
  • Field configurable relay levels and time delays
  • Field selectable input type and output scale units
  • Field reconfigurable High, Low and Band Pass filters
  • Reduced cost alternative to rack mount monitors
  • Drives dynamic signals over long distances (300 m or 1000 ft.)
  • Interfaces an accelerometer, velocity sensor, or proximity probe system to a PLC, DCS or other 4-20 mA input monitor
  • Provides 4-20 mA output proportional to vibration level
  • Sensor/cable input status light (green/red LED)
  • Alarm status light (flashing yellow/red LED)
  • BNC connector for waveform analyzers


  • Industrial Fans
  • Centrifugal Compressors
  • Reciprocating Compressors
  • Motors & Pumps
  • Generators
  • Centrifuges
  • Natural Gas/Diesel Engines
  • Turbines